Vehicle mounting
There are so many ways to mount a camera to a vehicle. If this is something you require, I can work with you to find a safe solution.
Rigging a camera to a vehicle can add production value to your project.
Don't worry. Safety straps were added after the camera position was confirmed by the DP.
Hood mount? Hostess tray? Gimbal mount? Suction cups or magnets? There are lots of options.
Vehicle mounting equipment
Rigwheels CloudMount - Suction Cups or Magnets
Rigwheels CloudMount - Suction Cups or Magnets
Rigwheels CloudMount - Suction Cups or Magnets
$150/day Includes Hostess Tray 1 in inventory
2” Trailer Hitch Billet Mount
Rigwheels CloudMount - Suction Cups or Magnets
Rigwheels CloudMount - Suction Cups or Magnets
$50/day 1 in inventory
- Uses 1.25" Schedule 40 Pipe only
Mitchell Hitch Mount with 1.25” Pipe Adapter
Rigwheels CloudMount - Suction Cups or Magnets
Mitchell Hitch Mount with 1.25” Pipe Adapter
$10/day 1 in inventory
Attaches to Speed Rail (1.25") or Trailer Hitch Billet Mount
Proaim Airwave - ‘Black Arm’
Mitchell to 4’ Vertical 50mm Pipe (for Steadicam/Black Arm)
Mitchell Hitch Mount with 1.25” Pipe Adapter
$150/day 1 in inventory
- 5-15Kg Load Capacity
- Not robust enough? Request the Heavy Springs
Proaim Airwave Heavy Springs
Mitchell to 4’ Vertical 50mm Pipe (for Steadicam/Black Arm)
Mitchell to 4’ Vertical 50mm Pipe (for Steadicam/Black Arm)
1 pair in inventory
- 15 -30Kg /33 - 66lbs Load Capacity
- Easily changed for heavier loads
Mitchell to 4’ Vertical 50mm Pipe (for Steadicam/Black Arm)
Mitchell to 4’ Vertical 50mm Pipe (for Steadicam/Black Arm)
Mitchell to 4’ Vertical 50mm Pipe (for Steadicam/Black Arm)
$10/day 1 in inventory
Cinemilled Back Seat System
Cinemilled Back Seat System
Cinemilled Back Seat System
$25/day 3 in inventory
$10/day Mitchell Plate adapter 1 in inventory
For mounting monitors and remote wheels to the back of the headrest in a car. For focus pullers, camera operators, & DPs.
Mitchell Vibration Isolator
Cinemilled Back Seat System
Cinemilled Back Seat System
$25/day 1 in inventory
5-15Kg Load Capacity
Mounting accessories
Case of Ratchet Straps and Safety Straps/Tie Downs
$20/day
6” Vacuum Suction Cups c/w 1.25” Pipe Adapters
$20/day each 4 in inventory
6” Vacuum Suction Cups with 3/8-16 thread
$10/day 1 in inventory
4.5” Vacuum Suction Cups - Set of 8
$50/day
3”x6” Vacuum Suction Cup with Cinemilled Mounting Block
$10/day 1 in inventory
3” Vacuum Suction Cup with ¼-20 Thread
$5/day 1 in inventory
90 degree 1.25” KeeLite Clamps
$3/day each 2 in inventory
1.25” Swivel Clamps
$4/day each 6 in inventory
1.25” Houdini Clamps
$5/day each 2 in inventory
1.25" Swivel Clamps - Hand Tightened
$7/day each 3 in inventory
5/8” rod connectors
$2/day each 4 in inventory
5/8” rods - 2x 6", 2x 9", 2x 12", 1x 14", 2x 18"
$10/day for the set